|
Concentration-Dependent Phase Instability Of Alx(CoCrFeNi)1-x After Severe Plastic Deformation
Lydia Daum, Chr. Aaron Rigoni, Erhard Schafler, Martin Peterlechner, Sergiy V. Divinski, Gerhard Wilde
|
|
Segregation induced grain boundary phase transition in Ti
Vivek Devulapalli, Tobias Brink, Timofey Frolov, Christian Liebscher, Gerhard Dehm
|
|
microstructural based life assessment of 1CrMoV steam turbine rotors after prolonged service
Hlanganani Nyembe, Johan Westraadt
|
|
Hydrogen induced titanium aluminide embrittlement in temporary hydrogen treated Ti-6Al-4V
Velile Vilane, Robert Knutsen, Johan Westraadt
|
|
Modification of ZrO2 layer on ZIRLO to prevent Hydrogen Pick Up
Sinoyolo Ngongo, Arno Janse Van Vuuren, Jan. H Neethling, V.V Uglov
|
|
Metallography of organ pipe grain structure may enable more faithful conservation of historical musical instruments
Yangchen Lin
|
|
2D and 4D high-resolution scanning transmission microscopy of GP-zones in the 6xxx system
Christoph Hell, Yasuhito Kawahara, Jonas Frafjord, Ruben Bjørge, Kenji Kaneko, Randi Holmestad
|
|
Atomic structure of [111] tilt boundaries of Aluminum in relation to their crystallographic parameters
Saba Ahmad, Tobias Brink, Christian H. Liebscher, Gerhard Dehm
|
|
Elemental partitioning and boride formation during crystallization of Fe-Cr-Ni-B and Fe-Cr-Mo-Nb-B glassy alloys
Walter Botta, Diego Coimbrão, Jose Eduardo Berger, Witor Wolf, Guilherme Koga, Guilherme Zepon
|
|
Hydrogen desorption of reactive milled TiVNbCr multicomponent alloy: An investigation by in-situ Synchrotron X-ray Diffraction and in-situ Transmission Electron Microscopy
Guilherme Zepon, Renato Strozi, Claudia Zlotea, Walter José Botta
|
|
Atomically-resolved STEM and 3DAP analysis of the dislocation dragging mechanisms in nitrogen-added Fe-Cr-Ni austenitic stainless steels
Yasuhito Kawahara, Shunya Kobatake, Chikako Takushima, Jun-Ichi Hamada, Taisuke Sasaki, Tadakatsu Ohkubo, Kenji Kaneko
|
|
EBSD and TKD studies of pure magnesium deformation and cracking mechanism under severe plastic deformation
Pawel Nowakowski, Mary Ray, Paul Fischione
|
|
Segregation of Yttrium at the Mg-MgO Interface in an Mg-0.5Y Alloy
Shihao Wang
|
|
Effect of Tempering on Microstructural Evolution and Hydrogen-Induced Fracture of SNCM439 Steel
Min-Zhe Li, Kai-Fan Lin, Hsin-Chih Lin
|
|
Investigation of the atomic microstructure evolution of Al3Li/Al2Cu/Al3Li precipitates in the Al-3.6Cu-0.9Li-0.34Mg-0.35Ag-0.34Mn-0.08Zr (wt.%) aluminium alloy
Tsai-Fu Chung, Shan-Qiao Lin, Chien-Nan Hsiao, Jer-Ren Yang
|
|
Nano-phase transformation of composite precipitates in multicomponent Al-Mg-Si(-Sc) alloys
Shuangbao Wang, Chengfu Pan
|
|
Strain-free growth of wafer-scale silver film on copper buffer layer mediated by monoatomic-thick strain-absorbing layer at the interface
Seon Je Kim, Su Jae Kim, Young-Hoon Kim, Min-Hyoung Jung, Hu Young Jeong, Se-Young Jeong, Young-Min Kim
|
|
Effect of heat treatment on the microstructure of the CuCrZr alloy
Anna Knaislová, Antonín Kříž
|
|
Advanced microscopy techniques for investigation of the precipitation in pre-strained Al-Cu-Mg alloy (AA2024)
Daniel Irmer, Mohamed Sennour, Lisa Belkacemi, Fan Sun, Charbel Moussa, Vladimir Esin
|
|
Crystallisation of multicomponent (Fe0.25Co0.25Ni0.25Cr0.125Mn0.125)87B13 glassy alloys
Diego Coimbrão, Guilherme Zepon, Guilherme Koga, Akihisa Inoue, Walter Botta
|
|
STEM Analysis of Precipitates Formed during Isothermal Aging in Al-Mg-Si Alloys
Genki Saito, Kaito Watanabe, Masahiro Ohtsuka, Shunsuke Muto, Kazuya Mizuno, Yamato Sano, Ken Takata, Fabio Iesari, Toshihiro Okajima
|
|
Microstructure and Corrosion Behavior of Spent High Manganese Steel
Sankum Nusen, Sorawee Kasemsuk, Atitaya Saelor, John Thomas Harry Pearce, Torranin Chairuangsri
|
|
SEM and EDS as a useful tool for cataphoretic coating and its industrial case studies
Zuzana Koutová, Marie Novotná
|
|
Transformation behavior of Cr-Mo-V hot work tool steel after tempering treatment under various austenitizing conditions
Chih-Yuan Chen, Iting Chiang, Tien-Tsuo He, Yung-Chang Kang
|
|
Rotary swaged copper under cryogenic condition.
Jaromír Kopeček, Tomáš Kmječ, Petr Veřtát, Daniel Šimek, Ubaid Ahmed, Jan Duchoň, Mariana Klementová, Lucia Bajtošová, Radim Kocich
|
|
Microstructure Formation of GeTe-Based Thermoelectric Materials
Ying Chun Chao, Yi-Fen Tsai, Hsin-Jay Wu, Hung-Wei Yen
|
|
Scanning electron diffraction study of TiFeAl alloy microstructure
Petr Vacek, Rosie Mellor, Nick Jones, Howard Stone, Paul Midgley
|
|
Local atomic order in the shear-bands of CuxZr100-x metallic glasses investigated using scanning electron nano-diffraction
Huyen Pham, Daniel East, Timothy Petersen, Amelia Liu
|
|
Direct observation of quadrupolar strain fields forming a shear band in metallic glasses
Sangjun Kang, Xiaoke Mu, Wang Di, Christian Minnert, Karsten Durst, Christian Kübel
|
|
Revealing the solute behavior at interphase by Atom Probe Tomography in a novel microalloyed cold-rolled Dual Phase steel
Shao-Lun Lu, Limei Yang, Siyu Huang, Pang-Yu Liu, Kuo-Cheng Yang, Ching-Yuan Huang, Yi-Sheng Chen, Julie Cairney, Hung-Wei Yen
|
|
Microstructures and soft magnetism of (MnFeCoNiCu)Alx multicomponent alloys via TEM
Liu Yuying
|
|
Abnormal charge modulation of ƞ precipitates in aluminum alloy revealed by 4D STEM
Juhyun Oh, Hwangsun Kim, Jooyoung Jeon, Youngjun Lee, Dameul Jeong, Young-Kyun Kwon, Heung Nam Han, Miyoung Kim
|
|
Elastic strain field measurements in a TEM around coherent particles in a matrix
Muriel Véron, Arthur Després
|
|
Texture analysis of a cold-rolled and annealed massive ferritic interstitial-free steel sheet
Shih-Yuan Lu, Jer-Ren Yang
|
|
Effect of Sub-zero Treatment on the Microstructural Characteristics and Mechanical Properties of Maraging Stainless Steel
Po-Han Chiu, Jer-Ren Yang, Chih-Yuan Chen
|
|
Formation of a transition V-rich HCP phase during the α' to α + β phase
transformation process in additively manufactured Ti-6Al-4V
Hao Wang, Xiaozhou Liao, Simon Ringer
|
|
In-situ EBSD investigation of recrystallization of a copper sheet nanocrystallized by surface mechanical attrition treatment
François Brisset, Thierry Baudin, Zhidan Sun, Delphine Retraint
|
|
The reduction of creep life by adding Ru in Nickel-Based Single Crystal Superalloys at ultra-high temperature
Junbo Zhao, Haibo Long, Ze Zhang, Xiaodong Han
|
|
Characterization of Short-Range Order in Face Centered Cubic Multi-Principal Element Alloys
Francisco Coury, Vinícius Bacurau, Eric Mazzer, Angelo Andreolli, Robert Field, Michael Kaufman
|
|
Effect of trace elements on the T6 age-hardening behavior in Al-Zn-Mg ternary alloy
Hyeon-Woo Son, Yongyou Kim, Kwangjun Euh
|
|
Slow and Fast Annealing of Molybdenum Nanowires for Interconnect Applications
Ivan Erofeev, Antony Hartanto, Khakimjon Saidov, Zainul Aabdin, Antoine Pacco, Harold Philipsen, Frank Holsteyns, Utkur Mirsaidov
|
|
Differentiation between similar phases in an Al-10%Si alloy by EBSD dictionary indexing
Hallvard Relling, Erlend Østvold, Olav Leth-Olsen, Håkon W. Ånes, Yingda Yu, Sergey Khromov, Berit Kramer, Jarle Hjelen
|
|
The challenge in differentiation between ferrite and martensite in low carbon steel by use of EBSD Dictionary Indexing
Olav Leth-Olsen, Hallvard Relling, Erlend Østvold, Håkon W. Ånes, Yingda Yu, Sergey Khromov, Jan Ketil Solberg, Ruben Hansen, Morten Peder Raanes, Morten Karlsen, Jarle Hjelen
|
|
Electron Microscope Investigation of Phase Evolution and Microstructural Stability of Binary NiMn, Semi Heusler NiMnSb and NiMnSbV Medium Entropy Alloy
Aman Kumar Lal Das, Gaurav Dilip Rout, Avnish Singh Pal, Joysurya Basu
|
|
The anomalous lath martensite microstructure in maraging steel fabricated via directed energy deposition
Hyeonbeen Noh, Kenhee Ryou, Pyuck-Pa Choi
|
|
Characterization of Texture Evolution of Biodegradable Zinc Alloys using Quasi-In-Situ EBSD
Chengcheng Wu, Jian-Feng Nie
|
|
Microstructural evolution in additively manufactured and laser surface modified nickel and titanium alloys
Soham Mukherjee, Swarnendu Das, Hari Krishan Yadav, Arun Kumar Rai, Christ P Paul, Rajiv Kumar Mandal, Joysurya Basu
|
|
The Strain-induced Martensitic Transformation in Gradient Nanostructured Steels: Mechanism and it’s Role to Residual Stress Development
Yinsheng He, Hongyu Zhou, Wenyue Zheng, Keesam Shin
|
|
Strengthening and toughening mechanism of low Angle grain boundary in high strength steel and lath martensite merging phenomenon
Zhangsheng Ming
|
|
TEM study of structural features of Kanazawa gold leaves
Yuanzhe Xu, Kohei Aso, Hideyuki Murata, Yoshifumi Oshima
|
|
Mechanism of microcrack formation in dual-phase steels: semi in-situ characterizations by SEM-ECCI and EBSD analysis
Min-Yu Tzeng, Yi-Fan Hu, Ying-Chun Chao, Hung-Wei Yen
|
|
Transformation of metastable phases into the stable Mg2Si phase in aluminum alloys – An in-situ study
Tomasz Wojcik, Robert Kahlenberg, Georg Falkinger, Anna Krejci, Benjamin Milkereit, Ernst Kozeschnik
|
|
Characterization of plasticity and fracture for an aluminum alloy under complex stress states
Xiang Gao, Zhongming Xu, Zhifei Zhang, Can Zhou, Miao Han, Yanshan Lou, Kejian Li, Jia Zhou
|
|
The behaviour and mechanisms of grain growth of Mg-Al alloys
Qingwei Dai
|
|
Characterization and formation mechanism of nanoscale twinned copper in ultra-high strength martensitic steel
Kejian Li, Xu Zhengmeng, Shuoshuo Yu, Bo He, Zhangsheng Ming, Xiao Yang, Jie Zhao, Jin Zeng, Pengjun Cao, Jiling Dong, Qingwei Dai, Wei Cai, Xiang Gao
|
|
Morphological characterization of uniaxial stained 316L stainless steel
Waraporn Piyawit, Kanokwan Antanam, Panya Buahombura, Surasak Kuimalee
|
|
EM characterization of in-situ formed phases in titanium matrix composites with ceramic reinforcement
Eva M. Pérez-Soriano, Isabel Montealegre-Meléndez, Juan G. Lozano, Erich Neubauer, Sheila K. Lascano, Cristina Arévalo
|
|
Enhanced High-Temperature Elongation in Ni-Based Superalloys via Mo and Co Alloying while Maintaining Strength
Saurabh Tiwari, Hyo Ju Bae, Alireza Zargaran, Joong Eun Jung, Muhammad Ishtiaq, Young-Kook Lee, Jae Bok Seol
|
|
Microstructural and electrical analysis of the effects of various nitriding on Al-added 52100 bearing steel
Choi Dong-Jun, Ko Yoon Seok, Shim Jae-Hyeok, Lee Young-Su, Kang Minwoo, Kim Donghwi, Hong Seung-Hyun, Han Heung Nam, Kim Dong-Ik
|
|
Exploring the interfacial properties of titanium carbide reinforced Fe composite with molybdenum influence
Seungchan Cho, Junghwan Kim, Sang-Bok Lee, Sang-Kwan Lee
|
|
Heterogeneous structures inspire synergistic ultrahigh strength and ductility in a low stacking faulted high-entropy alloy
Zibing An, Shengcheng Mao, Xiaodong Han
|
|
Investigation of secondary hardening mechanism in MP35N multi-component alloys:
Akshat Godha, Surendra Kumar Makineni
|
|
In-situ EBSD investigation of recrystallization of a copper sheet by surface mechanical attrition treatment
François Brisset, Thierry Baudin, Sun Zhidan, Delphine Retraint
|
|
Microstructural analysis and phase-field simulation of epitaxial growth in additively manufactured AlSi10Mg alloy
Jiwon Park, Joo-Hee Kang, Chang-Seok Oh
|
|
Transmission Electron Microscopy of Precipitates in AA7075T7352
Roopchand Tandon, Soham Mukherjee, Rampada Manna , Rajiv Kumar Mandal
|
|
Effects of cold rolling on the precipitation in an Al -Zn-Mg-Cu Alloy studied by HAADF-STEM
Yujin Rhee, Elisabeth Thronsen, Oskar Ryggetangen, Calin D. Marioara, Randi Holmestad, Equo Kobayashi
|
|
Investigation of precipitation behavior of AlN in SCr420 steels.
Tzu-Ching Tsao, Yu-Ting Tsai, Jer-Ren Yang
|
|
Multi-scale study of the evolution of carbides in nickel-base superalloy
Yiwei Ju, Shuai Li, Jing Zhu
|
|
In-situ/atomic analysis of microstructure in Ni-based single crystal superalloy
Haibo Long, Shengcheng Mao, Ze Zhang, Xiaodong Han
|
|
Thermally-driven microstructural changes in 15-5 precipitation-hardened steel during directed energy deposition
Kenhee Ryou, Hye Ji Im, Tae Hyeok Kang, Shotaro Jimbo, Shoichi Nambu, Jeongho Han, Pyuck-Pa Choi
|
|
Microstructural Analysis and Corrosion Evaluation of Atomic Layer Deposited Al2O3/ZrO2 Multilayer Films on Biodegradable Mg-Ca Alloy
Hou-Jen Chen, Pi-Chen Lin, Kai-Fan Lin, Miin-Jang Chen, Hsin-Chih Lin
|
|
In-situ Generated TiC/Graphene Core-shell Structure in Graphene Nanosheets-Inconel718 Composites by Spark Plasma Sintering
Shuan Ma, Shaolan Wang
|
|
Imaging material elasticity using Spatially Resolved Acoustic Spectroscopy (SRAS) ++
Wenqi Li, Paul Dryburgh, Rikesh Patel, Richard Smith, Matt Clark
|
|
B2-precipitation induced optimization of grain boundary character distribution in an Al0.3CoCrFeNi high-entropy alloy
Honghong Su, Qunhua Tang, Pinqiang Dai, Pan Gong, Haiyan Wang, Xueyong Chen
|
|
Atomic-resolution imaging of micro-alloyed and ultralight elements in nano-scale precipitates in Al-Cu-Mg-Ag(-Li) alloys using HAADF, ABF, EDX and EELS techniques of STEM
Shenlan Yang, Bryan Esser, Scott Findlay, Joanne Etheridge, Nick Wilson, Jian-Feng Nie
|
|
Multiscale correlative electron microscopy microstructure resolution of transition-metals high-entropy alloys
Andreja Jelen, Koželj Primož, Stanislav Vrtnik, Jože Luzar
|
|
Electron microscopy study of liquid phase plasma film formation in high-gravity environment
Qu Yao
|
|
Correlative Electron Microscopy and Atom Probe Tomography studies on defects and grain boundaries in multicomponent alloys
Akshat Godha, Nithin Baler, Surendra Kumar Makineni
|
|
Impact of Solidification-Induced Pre-Precipitation on the Age-Hardenability and Thermal Conductivity of Al‒7Si‒0.35Mg Alloy
Saif Kayani, Kwangjun Euh, Jung-Moo Lee, Young-Hee Cho
|
|
Effect of cyclic heat treatment on the microstructure and properties of DC53 steel
He Bo
|
|
Unveiling the dynamic TRIP process and its impact on the mechanical properties of dual-phase high-entropy alloys
Sijing Chen, Qian Yu
|
|
Microstructural and mechanical characterizations of tribologically transformed structure obtained by fretting in Ti–6Al–4V
Maxime Vallet, Vivien Lefranc, Eva Héripré, Camille Gandiolle, Véronique Aubin, Sigfrid Fouvry
|
|
On the influence of Co variation on the high temperature coarsening kinetics of γ' precipitates in a L12-strengthened Complex Concentrated Superalloy
Sudeepta Mukherjee, Surendra Makineni, B.S. Murty, Satyam Suwas
|
|
The Ca–Mg–Zn ternary precipitates in ZX20 Mg alloy resolved by ultra-high resolution STEM HAADF imaging and EDS mapping supported by simulations
Robin Schäublin, Duncan Alexander, Stephan Gerstl, Jörg Löffler
|
|
In situ Laser Study and Multi-Scale Simulations on Fe-Cr-Ni System
Kinga Unocic, John Lasseter, Steven Randolph, Yousub Lee, Rangasayee Kannan, Spencer Gellerup, Philip Rack, Stephen Jesse
|
|
Strategy to improve the strength of metastable austenitic stainless steel by modified tempering
Chien-Yu Tseng, Jer-Ren Yang
|
|
The microstructure and orientation change of Ni-based superalloys under Super-Gravity condition
Guo Yang, Hui Zhou, Xueqiao Li, Wenshuai Wang, Haibo Long, Shengcheng Mao, Ze Zhang, Xiaodong Han
|
|
Phase transformation of Cu precipitates in Fe-10Cu alloy fabricated by Hot Isostatic pressing
Hyun-Su Kang, Hyuk-Su Han, Hyung Giun Kim, Taeg Woo Lee
|
|
Microstructure Properties of Bronze containers excavated from Historic site in Korean Peninsula
So-Jin Kim, Woo-Rim Han, Eun-Woo Lee
|
|
Atom Probe Tomography Analysis on Prior Austenite Grain Boundary Precipitations of Mn-bearing Lightweight Maraging Steel
Seoung-Ho Lim, Pyuck-Pa Choi, Chae Young Kim, Jeongho Han
|
|
A novel type of precipitation/matrix orientation relationships and thermal stability of microstructure and Texture in Ultra-Fine Grained (UFG) Al-Mg-Sc-Zr alloy
Sankaran Shanmugam
|
|
Modification of ZrO2 layer on ZIRLO to prevent Hydrogen Pick Up.
Sinoyolo Ngongo, Arno Janse Van Vuuren, Jan Neethling, Vv Uglov
|
|
Boron segregation behavior in a microstructure complex multiphase lightweight steel
Xizhen Dong, Aparna Saksena, Baptiste Gault , Dirk Ponge, Binhan Sun, Dierk Raabe
|
|
Microstructures and soft magnetism of (MnFeCoNiCu)Alx multicomponent alloys via TEM
Yuying Liu Zi-An Li
|
|
Revealing the electrochemical potential depended SCC initiation mechanisms of pipeline steel in near-neutral pH environment
Ci Zhang, Hantong Wang, Yinsheng He, Yao Wang, Wenyue Zheng
|
|
Predicting microstructure evolution near grain boundary using machine learning in a nickel-based superalloy
Wenjie Gao, Ni Wang, Yuefei Zhang
|
|
Real-time fatigue crack damage prediction based on in-situ SEM method and machine learning
Jianli Zhou, Ni Wang, Yuefei Zhang
|
|
Accelerating the Manufacturing Process of β-Titanium Alloys Via Electric Current Treatment
Yijae Kim, Howook Choi, Yanghoo Kim, Heung Nam Han
|
|
Unusual Mn valence distribution in the vicinity of the tensile-strained interface between CaMnO3 and La0.7Ca0.3MnO3 layers
Nam-Suk Lee
|
|
Effect of amorphous complexions on plastic deformation of nanolayered composites
Zhe Yan, Zhaorui Liu, Bonan Yao, Qi An, Ruifeng Zhang, Shijian Zheng
|
|
Elucidating Local Ordering in Deformed FCC Alloys Through HRSTEM
W. Streit Cunningham, Hannah Howard, Pulkit Garg, Edward Li, Divya Singh, Arda Genc, Timothy Rupert, Daniel Gianola
|
|
Deformation induced inclusions in hexagonal HoDyGdTb high-entropy alloy
Qianqian Lan, Laura Rosenkranz, Nataliya Yadhzak, Uwe Glatzel, Michael Feuerbacher
|
|
Effect Peening on the Mechanical Property and Microstructural Evolution of Metallic Alloys
Nomin-Erdene Battulga, Odnyam Renchindorj, Sijia Liu, Liming Xu, Jinesung Jung, Han-Sang Lee, Youngdae Kim, Minsuk Lee, Sungho Jeong, Keesam Shin
|